The railway from Nice PLM Station to Tende and Cuneo was completed in 1928. It was long in the gestation and in construction. The story stretches back more than a century and a half. ‘Le Chemin de fer du Col de Tende’ is historically a significant local and international line. Its inverted Y-shaped layout and its crossing of international borders means that it is known by a number of different names:
- in Nice it is known as the Nice – Coni Line;
- generally in Italy it is officially Ferrovia Cuneo Ventimiglia
- in the Piedmont city of Cuneo’s economic/political circles, sitting at the top of the inverted ‘Y’, it is often referred to as the Cuneo – Nizza line in recognition of good relations with the community of Nice.
quote:Its story is a saga of significant technical achievement: gaining 1000 metres in height ; having a dozen tunnels longer than 1 kilometre (including those of the Col de Tende (8098 m), the Col de Braus (5939 m) and the Mont Grazian tunnel (3882 m), which are among the longest structures on the French and Italian networks); having four complete helical loops, several S-shaped loops and a multitude of bridges and viaducts (some of which, such as those of Scarassouï or Bévéra, are architecturally significant railway structures. Of a total route of 143.5 km, 6.5 km are on bridges or viaducts and over 60 km are in tunnels. This means that close to 42% of the journey along the line(s) is on or within structures.
Posted by Roger Farnworth (Member # 197595) on :
An aside from Les Trains du Col de Tende
Scotte Steam-powered Road Trains
I first came across the Scotte Steam-powered vehicles while following the story of Les Trains du Col de Tende...
Société des Chaudières et Voitures à Vapeur système Scotte was a French manufacturer of steam-powered trucks, tractors, and omnibuses in Paris from 1893 to circa. 1914. The company also built the Train Scotte, an early road train for passenger or freight transport.
I first encountered the Train Scotte when reading about the Cuneo-Ventimiglia-Nice international railway line in a book by Jose Banaudo, Michel Braun and Gerard de Santos; Les Trains du Col de Tende Volume 1: 1858-1928. [2] The partial opening of the that railway from Cuneo to Vievola in October 1900 left travellers heading for the Mediterranean in the middle of nowhere!
An experimental steam road train was trialled on the roads from Vievola to Ventimiglia. It was supplied by Société des Chaudières et Voitures à Vapeur système Scotte.
Posted by Roger Farnworth (Member # 197595) on :
Part 2
In this second article about the lines from Cuneo to the Mediterranean we recommence ourjourney at Vernante Railway Station and head Southeast.
Our journey South down the line continues from Vievola.
Posted by Gilbert B Norman (Member # 1541) on :
Reverend, perhaps a map of the region will assist readers in locating the points noted within the article.
Posted by Roger Farnworth (Member # 197595) on :
A Tramway in the Valley of the River Roya? (Early 20th Century)
While finding out about the line between Cuneo and the Mediterranean coast, I found a few paragraphs in the French language book about the railway which crossed the Col de Tende by Jose Banaudo et al. Those paragraphs were about a proposed tramway that in the end did not get built. … The featured image in the linked article is a map showing the full length of the proposed line.
He presented an application filed on 7th February 1899.” …....
The submission made by M. Chatelanat began, “The electric tramway for which we are requesting a concession is intended to facilitate the movement of passengers and goods in the Roya Valley through a rapid, convenient, and economical means of communication. Currently, to reach Nice and the other communes of the department, the population of the French part of this valley must either travel more than 60 kilometres along the old Nice-Cuneo road, crossing the foothills of Brouis and Braus, in unsafe conditions due to the steep slopes, the height of the passes, and, in winter, the seasonal inclement weather. Or, since the opening of the national road from Breil to Ventimiglia, travel approximately 30 kilometres and cross two customs lines to join the coastal railway line in Ventimiglia. … Between the coast and Upper Piedmont, especially the province of Cuneo, there is a very intense movement of population every year, but if you want to go by train, you have to make a long detour via Savona, which is long and expensive. The province of Cuneo sends to Nice and the coast some of its products that our region cannot obtain elsewhere. On the other hand, our particular products from the South are in demand and consumed in the upper Po Valley. Facilitating the movement of travelers and this exchange of products between Piedmont and the coast will at the same time allow the French populations of the Roya Valley to come easily and quickly to Nice to stock up and connect with the entire French coast without having to cross the Braus and Brouis passes, such is the goal we are pursuing.”
In the first three articles about the line from Cuneo to the sea we covered the length of the line from Cuneo to St. Dalmas de Tende. In the linked article we head South from St. Dalmas de Tende.
This article follows the line South from Breil-sur-Roya to Ventimiglia in two parts: the first as far as Airole and the second from Airole to Ventimiglia. ….
The featured image in the linked article shows an unidentified steam locomotive crossing the highly unusual Viaduc de Bevera. The train is heading toward Sospel.
The article begins the journey from Breil-sur-Roya to Nice. ... South of Breil-sur-Roya a junction allows direct access to Ventimiglia and to Nice.